当前位置:首页 > 开发 > 开源软件 > 正文

vim安装command-t插件

发表于: 2013-09-02   作者:hotsunshine   来源:转载   浏览次数:
摘要: commnad-t是一个很好的vim插件 安装的步骤似乎很简单,下载最新版本的commnad-t,进入到.vim目录 一次执行: vim command-t-1.4.vba :so % cd ~/.vim/ruby/command-t ruby extconf.rb make 但是我这里编译出现了问题 问题一 /usr/include/
commnad-t是一个很好的vim插件

安装的步骤似乎很简单,下载最新版本的commnad-t,进入到.vim目录
一次执行:
vim command-t-1.4.vba
:so %
cd ~/.vim/ruby/command-t 
ruby extconf.rb 
make 


但是我这里编译出现了问题

问题一
/usr/include/ruby/intern.h:412:1: error: unknown type name ‘fd_set’
 DEPRECATED(int rb_thread_select(int, fd_set *, fd_set *, fd_set *, struct timeval *));
 ^
make: *** [ext.o] Error 1


问题原因是编译中依赖的一些c库,有问题,在网上查了很多资料,最后升级ruby版本解决
rvm upgrade 1.9.2-p136 1.9.2-p180



问题二
command-t.vim requires Vim to be compiled with Ruby support


通过 vim --version
可以看到 字符串中赫然显示着 -ruby 这说明vim没有ruby的安装依赖

引用

One of my favourite plugins for Vim is Command-T:
an extremely fast, intuitive mechanism for opening files with a minimal number of keystrokes. It’s named “Command-T” because it is inspired by the “Go to File” window bound to Command-T in TextMate.
Sadly, the default installation of Vim on Snow Leopard does not have support for the ruby interpreter compiled in, which is a pre-requisite for using the plugin. Luckily, that’s easy enough to remedy, and in the process we’ll learn a thing or two about compiling your own custom Vim binary.

Let’s start off by getting the source code from the official Mercurial repository:

$ hg clone https://vim.googlecode.com/hg/ vim
$ cd vim

(Note: You don’t need to use the Mercurial repository – there are mirror sources for Subversion, CVS, as well as good ol’ tarballs with patches.)

The default branch for the mercurial repository contains the code for Vim 7.2 at the time of this writing. There is also a vim73 branch available for those feeling a bit more adventurous and wishing to compile the beta release of the next version. For this article, we’ll be sticking to the stable 7.2 release in the default branch.

Now, let’s take a look at the possible configuration options:

$ ./configure --help

There are quite a few, and I suggest that you take the time to read through them – most are quite self-explanatory. For Command-T, the one that we are interested in is the

--enable-rubyinterp
option.

So let’s take a shot at the simplest installation for terminal-based Vim usage, one without the GUI interface and (Linux) mouse daemon support:

$ ./configure --prefix=/my/install/prefix --enable-rubyinterp --enable-gui=no --disable-gpm
$ make

After the compilation process finishes (presumably with no errors), the first thing you’ll want to do is ensure that the binary you just built functions as expected:

$ ./src/vim --version | grep ruby
# you should see a `+ruby` line entry
$ ./src/vim

If you see the +ruby entry in the –version output and the binary launches without any errors, rejoice in your own awesomeness. That’s all there is to it.

If, however, you see something similar to this:

Vim: Caught deadly signal SEGV
Vim: Finished.
zsh: segmentation fault  ./src/vim
you’ve probably fallen prey to a (currently) not very well documented issue: Vim 7.2 does not support the integration of Ruby 1.9.x on Snow Leopard.

This means that if you’ve used a package manager such as Homebrew, MacPorts or Fink (shudder) to install the latest version of Ruby, Vim will link to that latest version instead of the system default installation of ruby 1.8.7.

Let’s fix that.

We’re going to edit the src/auto/config.mk generated by configure that was run earlier. Note that if you re-run configure at a later time, your changes to config.mk will be lost.

Find the lines that look like this:

RUBY            = /usr/local/bin/ruby
RUBY_SRC        = if_ruby.c
RUBY_OBJ        = objects/if_ruby.o
RUBY_PRO        = if_ruby.pro
RUBY_CFLAGS     = -I/usr/local/Cellar/ruby/1.9.1-p378/include/ruby-1.9.1 -I/usr/local/Cellar/ruby/1.9.1-p378/include/ruby-1.9.1/i386-darwin10.4.0 -DRUBY_VERSION=19
RUBY_LIBS       = -lruby -lpthread -ldl -lobjc

(Note: Your specific paths and/or versions may differ depending on the package manager that you are using. The above paths are actually not important, however, since we actually want to reset them to the system defaults.)

and replace them with the following:

RUBY            = /usr/bin/ruby
RUBY_SRC        = if_ruby.c
RUBY_OBJ        = objects/if_ruby.o
RUBY_PRO        = if_ruby.pro
RUBY_CFLAGS     = -I/System/Library/Frameworks/Ruby.framework/Versions/1.8 -I/usr/lib/ruby/1.8/universal-darwin10.0
RUBY_LIBS       = -framework Ruby

Alright, let’s see if this worked.

$ make clean && make

Before we check the binary as we did before, let’s see if we linked to the correct ruby libraries:

$ otool -L src/vim
src/vim:
    /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.2.0)
    /usr/lib/libncurses.5.4.dylib (compatibility version 5.4.0, current version 5.4.0)
    /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/libruby.1.dylib (compatibility version 1.8.0, current version 1.8.7)
    /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices (compatibility version 1.0.0, current version 44.0.0)
    /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 550.29.0)

Looking good so far – the binary is linked to the framework version of Ruby that comes as a default on Snow Leopard.

Let’s do a version check:

$ ./src/vim --version | grep ruby
# you should see a `+ruby` line entry
$ ./src/vim

And voilà: A custom-built Vim with ruby integration that will happily run the Command-T plugin.

All that’s left is to install it:

$ make install

Assuming your PATH is setup to correctly find the new Vim binary, you should be all set.


http://nerderati.com/2010/07/compiling-vim-with-ruby-integration-on-snow-leopard/

vim安装command-t插件

  • 0

    开心

    开心

  • 0

    板砖

    板砖

  • 0

    感动

    感动

  • 0

    有用

    有用

  • 0

    疑问

    疑问

  • 0

    难过

    难过

  • 0

    无聊

    无聊

  • 0

    震惊

    震惊

编辑推荐
vim 各种插件安装 2012-03-30 19:33:30 标签: 职场 休闲 vim IDE 京鱼网:www.jingfis
安装如下几个插件 taglist 以分割窗口显示代码结构预览 下载地址:http://www.vim.org/scripts/scr
phpstorm和vim都是比较强大的编辑器,那么怎么在phpstorm中安装vim插件呢? 安装步骤: 1、File -&g
1 写在前面 Linux下编程一直被诟病的一点是: 没有一个好用的IDE, 但是听说Linux牛人, 黑客之类的也
下载和配置 NERDTree插件的官方地址如下,可以从这里获取最新的版本 https://github.com/scrooloose
vim中设置插件 工欲善其事,必先利其器。一个强大的开发环境可以大大提高工作效率。好吧,我知道这
最近刚装了新系统CentOS7,想要把编码环境配置一下,使用Vim编写程序少不了使用自动补全插件,我以
vim中的project插件可以将文件组织成一棵树的形式,以便于查找和管理。效果图如下,如果不是的话,
哈哈这个插件啊,就是电影那种字符突突的往下滑的效果,当时感觉能看懂那真牛逼,哎我的童年啊,效
无意中看到实验室的朋友使用的vim竟然能在左边显示树形目录,感觉很方便,这样子文件夹有什么文件一
版权所有 IT知识库 CopyRight © 2009-2015 IT知识库 IT610.com , All Rights Reserved. 京ICP备09083238号