当前位置:首页 > 开发 > 数据库 > 正文

mysql Can't connect to local MySQL server through socket '/usr/local/mysl'

发表于: 2014-09-13   作者:zwllxs   来源:转载   浏览:
摘要: 如果人品不好的话,在centos上用源码安装个mysql着实是个巨大工程 在这上面的问题全是以递归式拔萝卜带泥的式出现的, 其中一个 出现Can't connect to local MySQL server through socket '/tmp/mysql.sock'终于解决,记录一下. 在安装mysql时已经指定了目录为/usr/local/mysql,而生成的my.cnf里,
如果人品不好的话,在centos上用源码安装个mysql着实是个巨大工程

在这上面的问题全是以递归式拔萝卜带泥的式出现的, 其中一个 出现Can't connect to local MySQL server through socket '/tmp/mysql.sock'终于解决,记录一下.

在安装mysql时已经指定了目录为/usr/local/mysql,而生成的my.cnf里,并没有指定相关目录,却指定了sock目录,这样导致mysql访问不到sock文件,所以我贴出我修改后的my.cnf,


# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# MySQL programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, see:
# http://dev.mysql.com/doc/mysql/en/option-files.html
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#password	= your_password
port		= 3306
socket		= /usr/local/mysql/mysql.sock

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
user=mysql
port		= 3306
datadir=/usr/local/mysql/data
basedir=/usr/local/mysql 
socket		= /usr/local/mysql/mysql.sock
skip-external-locking
key_buffer_size = 16M
max_allowed_packet = 1M
table_open_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
# 
#skip-networking

# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# binary logging format - mixed recommended
binlog_format=mixed

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id	= 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /usr/local/mysql/data
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /usr/local/mysql/data
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
default-character-set = utf8

[myisamchk]
key_buffer_size = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout


添加了几个变量,指定mysql目录后,再进入mysql bin目录,运行 /usr/local/mysql/bin/mysqld_safe & 终于解决,能连上mysql了,
然后继续奋斗

mysql Can't connect to local MySQL server through socket '/usr/local/mysl'

  • 0

    开心

    开心

  • 0

    板砖

    板砖

  • 0

    感动

    感动

  • 0

    有用

    有用

  • 0

    疑问

    疑问

  • 0

    难过

    难过

  • 0

    无聊

    无聊

  • 0

    震惊

    震惊

编辑推荐
Can't connect to local MySQL server through socket '/tmp/mysql.sock' 提示得很清楚 就是连接的
python 连接mysql 失败: OperationalError: (2002, "Can't connect to local MySQL server through
我的是CentOS6.3+MySQL5.1.57。 重启了一次服务器后,使用> mysql -u root -p登陆是出现下面的错
关于CentOS输入mysql提示: ERROR 2002 (HY000): Can't connect to local MySQL server through soc
关于CentOS输入mysql提示: ERROR 2002 (HY000): Can't connect to local MySQL server through soc
今天用navicat连接mysql时候出现2003 -can't connect to mysql server on ‘localhost'(10061)错误
Error No.2003 Can't connect to MySQL server on '10.88.49.122' (10061),报错 截图如下: 在CMD中
环境:Navicatfor Mysql 8.2 + MySQL Sever 5.1 问题:通过MySQL命令行不能连接,输入密码后无反应
错误描述 错误原因 最近,我一直都可以用SQLyog连接本地数据库,但是近几天却无法连接;并且一直都
原来一直是使用MySQL安装版没有出现过问题,今天在安装绿色版MySQL时出现了点问题 在安装成windows服
版权所有 IT知识库 CopyRight © 2009-2015 IT知识库 IT610.com , All Rights Reserved. 京ICP备09083238号