当前位置:首页 > 开发 > 系统架构 > 架构 > 正文

BEA-000342 this server is unable to establish a connection to the node manager

发表于: 2011-01-13   作者:Dead_knight   来源:转载   浏览次数:
摘要: 异常信息: <2011-1-13 下午09时21分44秒 CST> <Warning> <Security> <BEA-090504> <Certificate chain received from localhost - 127.0.0.1 failed hostname verification check. Certifica
异常信息:
<2011-1-13 下午09时21分44秒 CST> <Warning> <Security> <BEA-090504> <Certificate chain received from localhost - 127.0.0.1 failed hostname verification check. Certificate contained imep1 but check expected localhost> 
<2011-1-13 下午09时21分44秒 CST> <Warning> <NodeManager> <BEA-300038> <The node manager is unable to monitor this server. Could not create an SSL connection to the node manager. Reason : [Security:090504]Certificate chain received from localhost - 127.0.0.1 failed hostname verification check. Certificate contained imep1 but check expected localhost> 
<2011-1-13 下午09时21分44秒 CST> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.> 
***************************************************************************
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.'
Reason: weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.
***************************************************************************


解决方案1(推荐):
解除host1的weblogic文件共享;
同时重装host2上的weblogic。
然后,在按本文档前面有关主机2上主机的操作进行即可。
解决方案2:
进入http://localhost:9001/console;
打开portalClusterDomain> Servers> adminServer,进入Configuration 的 Keystores & SSL,展开Advanced Options,将  Hostname Verification的值改为”None”;
打开portalClusterDomain> Servers> host2-server1,进入Configuration 的 Keystores & SSL,展开Advanced Options,将  Hostname Verification的值改为”None”;
打开portalClusterDomain> Servers> host2-server2,进入Configuration 的 Keystores & SSL,展开Advanced Options,将  Hostname Verification的值改为”None”;
注意:上面操作中只修改了adminServer、host2-server1、host2-server2,没有对host1-server1、host2-server2进行修改,因为,host2-server1、host2-server2本身就是在host1主机上,可以不修改。
解决方案3:
给host1主机上的startWebLogic.sh添加如下启动参数:-Dweblogic.security.SSL.ignoreHostnameVerification=true
同时,在控制台,为host2-server1、host2-server2增加启动参数:-Dweblogic.security.SSL.ignoreHostnameVerification=true

BEA-000342 this server is unable to establish a connection to the node manager

  • 0

    开心

    开心

  • 0

    板砖

    板砖

  • 0

    感动

    感动

  • 0

    有用

    有用

  • 0

    疑问

    疑问

  • 0

    难过

    难过

  • 0

    无聊

    无聊

  • 0

    震惊

    震惊

编辑推荐
The Network Adapter could not establish the connection 1) 查看TNSListener是否已经启动 2)TNSL
Cisco的VPN客户端最近报“AnyConnect was not able to establish connection to the specified secu
异常: The Network Adapter could not establish the connection 关键字: 异常: the network adapte
异常: The Network Adapter could not establish the connection 关键字: 异常: the network adapte
Io 异常: The Network Adapter could not establish the connection 这个异常的出现一般与数据库 设
Io 异常: The Network Adapter could not establish the connection 这个异常的出现一般与数据库 设
摘自:http://www.diybl.com/course/3_program/java/javashl/20071126/87790.html Io 异常: The Net
Io 异常: The Network Adapter could not establish the connection 这个异常的出现一般与数据库和
摘自:http://www.diybl.com/course/3_program/java/javashl/20071126/87790.html Io 异常: The Net
2008-11-11 这种异常的出现大致上有下面几种: 1。IP错误。 在设置URL时错误,例如:jdbc:oracle:th
版权所有 IT知识库 CopyRight © 2009-2015 IT知识库 IT610.com , All Rights Reserved. 京ICP备09083238号